home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-20
/
nosvw.zip
/
CONNECT
< prev
next >
Wrap
Text File
|
1991-09-18
|
1KB
|
28 lines
======= NOSview [137]
connect
=======
_________________________________________________________________
connect <interface> <callsign> [<digi_callsign> ...]
_________________________________________________________________
Initiate a "vanilla" AX.25 session to the specified <callsign>
using the specified <interface>. Data sent on this session goes
out in conventional AX.25 packets with no upper layer protocol.
The de-facto presentation standard format is used, in that each
packet holds one line of text, terminated by a CR.
Up to 7 optional digipeaters may be given; note that the words
'via' or 'v' are NOT used. If digipeaters are specified, they
are automatically added to the AX.25 routing table as though the
'ax25 route add' command had been given.
After giving the 'connect' command, you should get "Conn Pending"
and then "Connected" messages. At this point, you're connected
just like using a plain old TNC.
When you're ready to disconnect, use the <F10> key to escape from
the session back to the "net>" prompt, and then give the
'disconnect' command.
>> Example: connect tnc0 AX9AAA AX9DIG